TIGHTENING TORQUES				
I HANDBRAKE (Vac/hyd)	Nm		Ibf. ft.	
I Cable locknut to fork  	24		18	
Cable clips and brackets  	9,5		7	
Cable abutment bracket  	26		19	
Lever pivot bolt  	57		42	
Pivot bracket to floor  	26		19	
Relay lever to handbrake lever  	48		35	
Switch bracket to abutment 	26		19	
Compensator link pin nut  	41		30	
Compensator bracket to axle  	48		35	
Compensator pivot pin nut  	106		78	
LOAD SENSING VALVE L.S.V. bracket to frame  	57		42	
L.S.V. to bracket  	57		42	
Clamping block bolt 	15		11	
MASTER CYLINDER AND SERVO (Vac/hyd) Vaster cylinder to servo  	24		18	
Servo to bulkhead  	12		9	
Adaptor to servo  	20		15	
I I BRAKE ASSEMBLIES (Vac/hyd) I Back pate to rear axle  	112		83	
Backplate to stub axle M10  	57		42	
M14  	149		110	
Front wheel cylinders to backplate 282 mm (11 inch) brake-capscrew  	15		11	
-setscrew  	12		9	
330 mm (13 inch) brake-small setscrew  	30,5		22.5	
-large setscrew  	68		50	
Rear wheel cylinders to backplate  	15		11	
Anchor pin nut (rear brakes)  	31		23	
PIPES AND HOSES Hoses to brackets and pipes  	12		9	
Hose brackets to frame  	26		19	
Pipe nuts M10 (male)  	10		7.5	
Pipe nuts all others  	12		9