Belt Adjustment (Power Steering)
6 Cylinder Petrol Engine
Remove the front section of the engine undertray. From below, slacken off the
pump pivot belt. From above slacken the strap pivot and slide bolt. Pivot the
pump away from the engine until the correct belt tension is obtained and holding
it in this position tighten slide bolt followed by two remaining bolts.
4 Cylinder Engines
Remove the front section of the engine undertray.
>From below slacken off strap pivot and slide bolt. From above slacken the
pump pivot bold.
Swing unit outwards away from the engine until correct belt tension is obtained.
Holding it in this position retighten slide bolt followed by remaining two bolts.
© Dodge50.co.uk™ 2002